Makita HR2651 OSHA Silica Compliance Catalog - Page 15

GRINDING / SURFACING APPLICATIONS OSHA RULE TABLE 1: HANDHELD GRINDERS FOR USES OTHER THAN MORTAR REMOVAL MAKITA® DUST EXTRACTION OSHA COMPLIANT SOLUTIONS 4-1/2" - 7" GRINDING / SURFACING (COMPATIBLE DUST EXTRACTORS) APPLICATION 4-1/2" - 5" Grinding / Surfacing APPLICABLE TOOLS 9557 Series, 956 Series, GA502 Series, XAG03, XAG04, XAG09, XAG11, XAG16, XAG20 DUST ATTACHMENT 195236-5 4-1/2" / 5" Dust Extraction Surface Grinding Shroud DUST EXTRACTOR XCV13Z 18V X2 LXT® Lithium-Ion (36V) Cordless/Corded 4 Gallon HEPA Filter Dry Dust Extractor/Vacuum OSHA 29 CFR 1926.1153 COMPLIANT PC5000C, PC5001C Integrated 9557 Series, 956 Series, GA502 Series, XAG03, XAG04, XAG09, XAG11, XAG16, XAG20 195236-5 4-1/2" / 5" Dust Extraction Surface Grinding Shroud VC4710 12 Gallon Xtract Vac® Wet/Dry Dust Extractor YES Option 1, Table 1 of Specified Exposure Control Methods* PC5000C, PC5001C, PC5010C Integrated 7" Grinding / Surfacing GA7011C, GA7040S 195386-6 7" Dust Extraction Surface Grinding Shroud YES Option 2, Performance (Objective Data)** *XCV04 Dust extractor must be utilized in AC mode (plugged into power outlet) in order to achieve the CFM requirement for this application. **Compliant under Option 2, Objective Data of the OSHA standard for Occupational Exposure to Respirable Crystalline Silica (rule 1926.1153) when dust extractor is operated with the tested tool model and operated under conditions tested by Makita®. To see the test procedures go to makitatools.com/dustmanagement. Note: To ensure performance, verify that any engineer controls (accessory-components used with the dust collector/vacuum such as dust shrouds, dust extraction attachments, connectors) are used per manufacturer instructions and are securely attached to a compliant vacuum. GRINDING / SURFACING (DUST EXTRACTOR ATTACHMENTS) (4-1/2"- 5") 195236-5 (7") 195386-6 195236-5 / 195386-6 4-1/2"- 7" Dust Extraction Surface Grinding Shroud • Soft brushes help prevent dust from escaping and help move the tool over the surface • 4-spring suspension system keeps shroud flush with surface during movement • Removable edge piece allows surface work flush to other objects 195386-6 works with GA7011C, GA7040S, GA9040S Standard hose fitting will work with most vacuum systems Removable front cap for flush to wall grinding MAKITATOOLS.COM/DUSTMANAGEMENT 15