Makita HR2811F Makita HR2811F Instruction Manual - Page 2

ENGLISH (Original instructions) SPECIFICATIONS Model HR2800/ HR2810 HR2810T HR2811F HR2811FT Capacities Concrete Tungsten-carbide tipped bit Core bit Diamond core bit (dry type) 28 mm 80 mm 80 mm Steel 13 mm Wood No load speed (min-1) 32 mm 0 - 1,100 Blows per minute 0 - 4,500 Overall length 314 mm 339 mm 320 mm 345 mm Net weight 3.4 kg 3.5 kg 3.5 kg 3.6 kg Safety class /II • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003 END201-5 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. For Model HR2800 ENE042-1 Intended use The tool is intended for hammer drilling and drilling in brick, concrete and stone. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. For Model HR2810, HR2810T, HR2811F, HR2811FT ENE043-1 Intended use The tool is intended for hammer drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. ENF002-2 Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated and can, therefore, also be used from sockets without earth wire. ENG905-1 Noise The typical A-weighted noise level determined according to EN60745: Model HR2800 Sound pressure level (LpA) : 89 dB(A) Sound power level (LWA) : 100 dB(A) Uncertainty (K) : 3 dB(A) Model HR2810, HR2810T Sound pressure level (LpA) : 89 dB(A) Sound power level (LWA) : 100 dB(A) Uncertainty (K) : 3 dB(A) Model HR2811F, HR2811FT Sound pressure level (LpA) : 90 dB(A) Sound power level (LWA) : 101 dB(A) Uncertainty (K) : 3 dB(A) 2