Makita HR2811F Makita HR2811F Instruction Manual - Page 3

General Power Tool Safety, Warnings, Save all warnings and, instructions for future reference. - rotary hammer

Page 3 highlights

Wear ear protection Vibration The vibration total value (tri-axial determined according to EN60745: ENG900-1 vector sum) Model HR2800 Work mode : hammer drilling into concrete Vibration emission (ah,HD) : 20.0 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode: drilling into metal Vibration emission (ah,D) : 2.5 m/s2 or less Uncertainty (K) : 1.5 m/s2 Model HR2810, HR2810T Work mode : chiselling Vibration emission (ah,CHeq) : 15.5 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode : hammer drilling into concrete Vibration emission (ah,HD) : 20.0 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode: drilling into metal Vibration emission (ah,D) : 2.5 m/s2 or less Uncertainty (K) : 1.5 m/s2 Model HR2811F, HR2811FT Work mode : chiselling Vibration emission (ah,CHeq) : 11.5 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode : hammer drilling into concrete Vibration emission (ah,HD) : 15.0 m/s2 Uncertainty (K) : 1.5 m/s2 Work mode: drilling into metal Vibration emission (ah,D) : 2.5 m/s2 Uncertainty (K) : 1.5 m/s2 ENG901-1 • The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. • The declared vibration emission value may also be used in a preliminary assessment of exposure. WARNING: • The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). For European countries only ENH101-16 EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Rotary Hammer Model No./ Type: HR2800, HR2810, HR2810T, HR2811F, HR2811FT are of series production and Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents: EN60745 The technical documentation is kept by: Makita International Europe Ltd. Technical Department, Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, England 30.01.2009 000230 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, 446-8502, JAPAN GEA005-3 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

3
Wear ear protection
ENG900-1
Vibration
The
vibration
total
value
(tri-axial
vector
sum)
determined according to EN60745:
Model HR2800
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 20.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model HR2810, HR2810T
Work mode : chiselling
Vibration emission (a
h,CHeq
) : 15.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 20.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Model HR2811F, HR2811FT
Work mode : chiselling
Vibration emission (a
h,CHeq
) : 11.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
) : 15.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We
Makita
Corporation
as
the
responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Rotary Hammer
Model No./ Type: HR2800, HR2810, HR2810T,
HR2811F, HR2811FT
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.01.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.