Home » Makita Manuals » Tools » Makita HR5000 » Manual Viewer

Makita HR5000 Owners Manual

Makita HR5000 Manual

View all Makita HR5000 manuals

Add to My Manuals
Save this manual to your list of manuals

Makita HR5000 manual content summary:

Makita HR5000 | Owners Manual - Page 1
Rotary Hammer 50 mm (2") MODEL HR5000 DOUBLE INSULATION 003101 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. www.makitatools.com
Makita HR5000 | Owners Manual - Page 2
Capacities Model Carbide-tipped bit Core bit Concrete Hume pipe No load speed (RPM) Blows per minute Overall length Net weight HR5000 50 mm (2") 150 mm Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock,
Makita HR5000 | Owners Manual - Page 3
and use common sense when operating a power tool. Do not use tool while tired or parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 22. Use only accessories
Makita HR5000 | Owners Manual - Page 4
servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions gained from repeated use) replace strict adherence to rotary hammer safety rules. If you use this tool
Makita HR5000 | Owners Manual - Page 5
the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin. 13. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. SAVE THESE INSTRUCTIONS WARNING
Makita HR5000 | Owners Manual - Page 6
stop. 003127 1 2 3 1. Change lever 2. For hammering only 3. For rotation with hammering Selecting the action mode Rotation with hammering For drilling in concrete, masonry, etc., rotate the change lever to the symbol. Hammering only For chipping, scaling or demolition operations, rotate the change
Makita HR5000 | Owners Manual - Page 7
positions. 003148 Side grip The side grip is convenient for downward drilling or chipping operations. Screw the side grip on the tool securely. to 2 secure the bit. 180 1. Tool holder 2. Tool retainer 37 27 19 19 A 003155 38.5 37 16ø CAUTION: • Never use A-type shank bits. They can cause
Makita HR5000 | Owners Manual - Page 8
OPERATION 003202 Hammer drilling operation Set the change lever to the symbol. Position the bit at the desired location out bulb (optional accessory) After drilling the hole, use the blow-out bulb to clean the dust out of the hole. 1. Blow-out bulb 003208 Chipping/Scaling/Demolition Set the
Makita HR5000 | Owners Manual - Page 9
2. Adapter 1 003209 1 Core bit (optional accessory) When using the center bit Screw the core bit on the adapter. Install the adapter with the core bit in the tool in the same manner as a drill bit. 2 003210 Install the center bit. 1. Center bit 003212 Rest the core bit on the concrete and turn
Makita HR5000 | Owners Manual - Page 10
and turn the tool on. Once the core bit has cut a shallow groove into the concrete, rotate the change lever to the position and resume drilling. NOTE: • No problem is caused even if the core bit unscrews slightly during brief use since the core bit rotates in the tightening direction. To remove the
Makita HR5000 | Owners Manual - Page 11
Makita Authorized or Factory Service Center for this lubrication service bit end pointing upwards. This will allow the old grease to collect inside the crank housing. Wipe out the old grease inside and replace with a fresh grease (90 g; 3 oz). Use only Makita genuine hammer grease (optional accessory
Makita HR5000 | Owners Manual - Page 12
accessories, ask your local Makita service center. • Spline shank Carbide-tipped bits • Bull point • Cold chisel • Scaling chisel • Clay spade • Grooving chisel • Rammer • Bushing tool • Spline shank to A-Taper adapter • Spline shank to SDS adapter • Core bit • Core bit adapter • Hammer grease • Bit
Makita HR5000 | Owners Manual - Page 13
Cut Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 First-Class Postage Required Post Office will not deliver without proper postage. Fold 13
Makita HR5000 | Owners Manual - Page 14
From Friend Previous Usage Other ( ) 2. Use of the product is intended for: Construction Trade Industrial Maintenance Home Maintenance Hobby Other ( ) 4. Most favored points are: Design Features Size Price Makita Brand Repair Service Durability Power Other ( ) 5. Any comments
Makita HR5000 | Owners Manual - Page 15
541-4776 CUSTOMER'S RECORD When you need service: Send complete tool (prepaid) to one of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of the carton detailing the problem with your tool. Date Purchased Dealer's Name
Makita HR5000 | Owners Manual - Page 16
sawing, grinding, drilling, and other Makita's Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT.