Makita HR5000 Owners Manual - Page 7
Side handle, Side grip, Installing or removing the bit - drill bits
View all Makita HR5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 2 1. Clamp nut 2. Side handle 1 Side handle 003140 Raise the side handle. The side handle can be secured in four position (right, left, up and down). To secure the side handle, tighten the clamp nut securely. Never secure the side handle in other than the above four positions. 003148 Side grip The side grip is convenient for downward drilling or chipping operations. Screw the side grip on the tool securely. The side grip can be installed on either side of the tool for right or left hand operation. 1. Side grip 003152 Installing or removing the bit 1 Insert the bit into the tool holder as far as it will go. Pull out and turn the tool retainer 180 degrees. Then release it to 2 secure the bit. 180 1. Tool holder 2. Tool retainer 37 27 19 19 A 003155 38.5 37 16ø CAUTION: • Never use A-type shank bits. They can cause damage to the tool. To remove the bit, follow the installation procedure in reverse. B 7