Makita HS0600 HS0600 Instruction Manual - Page 6

FUNCTIONAL 1 DESCRIPTION CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting depth of cut CAUTION: After adjusting the depth of cut, always tighten the lever securely. Loosen the lever on the depth guide and move the base up or down. At the desired depth of cut, secure the base by tightening the lever. For cleaner, safer cuts, set cut depth so that no more than one blade tooth projects below workpiece. Using proper cut depth helps to reduce potential for dangerous KICKBACKS which can cause personal injury. 2 2 3 ► 1 . Clamping screw 2. Bevel scale plate 3. Lever ► 1 . Lever 2. Depth guide Sighting 1 For straight cuts, align the 0° position on the front of the base with your cutting line. For 45° bevel cuts, align the 45° position with it. 1 2 Bevel cutting CAUTION: After adjusting the bevel angle, always tighten the lever and clamping screw securely. Loosen the lever and clamping screw. Set for the desired angle by tilting accordingly, then tighten the lever and clamping screw securely. ► 1 . Cutting line (0° position) 2. Cutting line (45° position) 6 ENGLISH