Makita JR3051T JR3051T Instruction Manual - Page 5
For tool without lock button
View all Makita JR3051T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger and then push in the lock button. To stop the tool from the locked position, pull the switch trigger fully, then release it. 1 The hook is convenient for hanging the tool temporarily. To use the hook, simply lift up hook until it snaps into the open position. When not in use, always lower hook until it snaps into the closed position. 1 2 ► 1 . Switch trigger 2. Lock button For tool without lock button To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop. 1 ► 1 . Hook Attach the hook by following procedure. 1. Insert the tip of slotted screwdriver into the notch and remove the the cover by pressing and sliding it. 1 ► 1 . Switch trigger Hook Optional accessory CAUTION: Always be sure that the tool is switched off and unplugged when hanging the tool. CAUTION: Never hang the tool at high or potentially unstable location. CAUTION: Do not hook the tool on your belt or other accessories. The recipro saw blade may contact your body and cause personal injury. 2 ► 1 . Notch 2. Cover 5 ENGLISH