Makita JS1300 Owners Manual - Page 7

Installing cutting head CAUTION: Secure the cutting head firmly. Otherwise it can rotate during operation and can cause serious injury. Insert the cutting head into the tool with turning it left and right alternately. Then tighten the three screws with the hex wrench. 7 Cutting head I \ Hex wrench OPERATION CAUTION: Edges and chips of the workpiece are sharp. Wear gloves. Otherwise it can cause injury. Secure the workpiece firmly. Move the tool forward keeping the side blades flush with the workpiece surface. Center blade I Adjusting shear blade Adjust the side blade L so that the curl of -, Side blade L Screws waste material does not contact the cutting head or the workpiece. Use the hex wrench to loosen the three screws which hold the cutting head. Move the side blade L back and forth to adjust it. Then tighten the three screws with the hex wrench. &Side b l a k 'Ieeve 1 Center blade 7