Makita LXPH03 Owners Manual - Page 9

1 1. Rear cover 2. Screws 2 012705 Use a screwdriver to remove two screws then remove the rear cover. 1 1. Arm 2. Spring 3. Recessed part 2 3 012706 Raise the arm part of the spring and then place it in the recessed part of the housing with a slotted bit screwdriver of slender shaft or the like. 1. Carbon brush cap 1 OPTIONAL ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Drill bits • Hammer drill bits • Screw bits • Blow-out bulb • Safety goggles • Makita genuine battery and charger • Grip assembly • Depth rod • Hook • Rubber pad assembly • Wool bonnet • Foam polishing pad • Battery protector NOTE: • Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. 012707 Use pliers to remove the carbon brush caps of the carbon brushes. Take out the worn carbon brushes, insert the new ones and replace the carbon brush caps in reverse. 1 1. Hole 2. Carbon brush cap 2 006304 Make sure that the carbon brush caps have fit into the holes in brush holders securely. Reinstall the rear cover and tighten two screws securely. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 9