Makita MP100DZ MP100D Instruction Manual - Page 8

OPERATION Using the English valve adapter 1. Unfold the air chuck clamp. 2. Insert the English valve adapter into the air chuck. 3. Fold the air chuck clamp firmly. 1 2 3 3. Fold the air chuck clamp firmly. 4. Turn on the tool, and then set the pressure value appropriate for the tire using the pressure gauge. 5. Keep pulling the switch trigger until the tool stops. The tire is inflated with the specified pressure. Using the Presta valve adapter 1. Loosen the locking nut on the valve stem. 1 4 ► 1 . English valve adapter 2. Air chuck 3. Air chuck clamp 4. Valve stem 4. Attach the English valve adapter to the valve stem while opening the English valve adapter. 5. Turn on the tool. 6. Inflate the tire by pulling the switch trigger while checking the status of the tire. NOTICE: When using the English valve adapter, the pressure gauge will not display an accurate value due to characteristics of the valve. When inflating a tire, do not use the value on the pressure gauge, but inflate it by checking the status of the tire. If the tool stops before the tire reaches the desired air pressure, adjust the pressure value, and then inflate the tire again. Using the Schrader valve adapter 1. Unfold the air chuck clamp. 2. Attach the air chuck to the valve stem. 1 2 3 ► 1 . Locking nut 2. Unfold the air chuck clamp. 3. Attach the Presta valve adapter to the valve stem, and then attach the air chuck to the Presta valve adapter. 1 2 3 4 ► 1 . Presta valve adapter 2. Air chuck 3. Air chuck clamp 4. Valve stem 4. Fold the air chuck clamp firmly. 5. Turn on the tool, and then set the pressure value appropriate for the tire using the pressure gauge. 6. Keep pulling the switch trigger until the tool stops. The tire is inflated with the specified pressure. 7. Remove the air chuck and Presta valve adapter, and then tighten the locking nut. ► 1 . Air chuck clamp 2. Valve stem 3. Air chuck 8 ENGLISH