Makita PO5000C Makita PO5000CX1 Instruction Manual - Page 5
Functional, Description
View all Makita PO5000C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. 2 1 ► 1 . Switch trigger 2. Lock button To start the tool, simply pull the switch trigger. The rotation speed will increase as you pull the trigger. Release the switch trigger to stop. For continuous operation, pull the switch trigger, push in the lock button and then release the switch trigger. To stop the tool from the locked position, pull the trigger fully, then release it. CAUTION: Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool. CAUTION: Do not plug in the tool with the lock-on switch engaged. The tool will be run unsupported and it may cause a personal injury or breakage. Speed adjusting dial The rotating speed can be changed by turning the speed adjusting dial to a given number setting from 1 to 5. Higher speed is obtained when the dial is turned in the direction of number 5. And lower speed is obtained when it is turned in the direction of number 1. Refer to the table for the relationship between the number settings on the dial and the approximate rotating speed. Number 1 2 3 4 5 Orbits per min. 1,600 2,500 3,700 5,300 6,800 Pad rotating speed per minute in random orbit with forced rota- tion mode 180 290 430 610 780 NOTICE: If the tool is operated continuously at low speeds for a long time, the motor will get overloaded, resulting in tool malfunction. NOTICE: The speed adjusting dial can be turned only as far as 5 and back to 1. Do not force it past 5 or 1, or the speed adjusting function may no longer work. Electronic function The tools equipped with electronic function are easy to operate because of the following features. Constant speed control Possible to get fine finish, because the rotating speed is kept constant even under the loaded condition. Soft start feature Soft start because of suppressed starting shock. Selecting the action mode Turn the change knob to alter the rotation mode. 1 ► 1 . Speed adjusting dial 1 ► 1 . Change knob 5 ENGLISH