Makita TD021DSE TD021D Instruction Manual - Page 5

FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. • Always switch off the tool before insertion or removal of the battery cartridge. Installing or removing battery cartridge 1. Button 2. Battery cartridge 1 1. Lock lever 2. Switch 2 010374 To start the tool, first move the lock lever to the unlocked position to release the switch lever. A B 1 2 010324 • To remove the battery cartridge, withdraw it from the tool while pressing the buttons on both sides of the cartridge. • To insert the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. • Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. Lock lever 1. Lock lever 1 2. Switch 2 010325 When the lock lever is in the locked position switch cannot be actuated. When the lock lever is in the unlocked position switch can be actuated. Switch action , the , the CAUTION: • Before inserting the battery cartridge into the tool, always check to see that the switch actuates properly and returns to the "OFF" position when released. B A 1 1. Switch 010329 And then turn the switch to A side for clockwise rotation or to B side for counterclockwise rotation. Tool speed is increased by increasing rotation force on the switch. Release the switch to stop. CAUTION: • Always check the direction of rotation before operation. • Change the direction only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. • When not operating the tool, always set the lock lever in the locked position . Lighting up the front light CAUTION: • Do not look in the light or see the source of light directly. 1 1. Lock lever 2. Light 2 010326 To start the tool, first move the lock lever to the released position to release the switch. 5