Makita TD022DSE TD022D Instruction Manual - Page 5
Assembly
View all Makita TD022DSE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Lock lever CAUTION: When not operating the tool, always set the lock lever in the locked position . A B 1 B A 1 2 ► 1 . Lock lever 2. Switch When the lock lever is in the locked position , the switch cannot be actuated. When the lock lever is in the unlocked position , the switch can be actuated. Switch action CAUTION: Before installing the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. CAUTION: Always check the direction of rotation before operation. NOTICE: Change the direction only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. To start the tool, first move the lock lever to the unlocked position to release the switch. 1 ► 1 . Switch Lighting up the front lamp CAUTION: Do not look in the light or see the source of light directly. To turn on the lamp only, first move the lock lever to the unlocked position . And then rotate the switch to the A or B side a little. Release the switch to turn off the lamp. 2 A B 3 1 ► 1 . Lamp 2. Lock lever 3. Switch NOTE: Use a dry cloth to wipe the dirt off the lens of the lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. 2 ► 1 . Lock lever 2. Switch And then turn the switch to A side for clockwise rotation or to B side for counterclockwise rotation. Tool speed is increased by increasing rotation angle on the switch. Release the switch to stop. ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. 5 ENGLISH