Makita UH6570 Owners Manual - Page 4
Functional Description, Assembly - tools
![]() |
View all Makita UH6570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
FUNCTIONAL DESCRIPTION Far area cut CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 1 2 1. Switch trigger B 2. Switch trigger A 3. Switch trigger C 3 009279 For your safety, this tool is equipped with a triple switching system. To turn on the tool, press two out of three triggers A, B and C. Release either one of the two pressed triggers to turn off. The sequence of switching is unimportant as the tool only starts when both switches are activated. Straight cut 009282 To trim the hedge in far area with both hands pull the switch triggers A and C. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Engage the extension cord CAUTION: • Make sure that the extension cord is unplugged to the mains outlet. 1 1. Hook complete 2 2. Tool's cord 3. Extension cord 009280 To trim the hedge straight, pull triggers A and B. Vertical cut 009281 Cut upwards with both hands pull the switch triggers B and C and move it in front of your body. 3 007542 When engaging the extension cord, secure it to the tool's cord with the hook complete. Attach the hook about 100 - 200 mm from the extension cord connector. This will help prevent unintentional disconnection. Waist cord hook CAUTION: • Do not attach the holder of waist cord hook to other than the extension cord. Do not attach it in a position closer to the tool beyond the hook complete. Failure to do so may cause an accident or personal injury. • When using the waist cord hook, use the extension cord as a standard equipment. Using an extension cord available in the market may cause an accident or injury. 4
![](/manual_guide/products/makita-uh6570-owners-manual-9051004/4.png)