Makita VC4210L VC4210L Safety Instructions - Page 9

1.10 Filter Cleaning system VC4210L: The extractor/vacuum is equipped with an automatic filter cleaning system that removes most of the fine dust from the filter element. To ensure that suction performance is operating at optimal performance, the filter element is automatically cleaned during operation. Manual cleaning by removing the filter is recommended if the filter element becomes extremely dirty. VC2512L and 3012L: The extractor/vacuum is equipped with a semi-automatic push and clean filter cleaning system that removes most of the fine dust from the filter element. To ensure that suction performance is operating at optimal performance, the filter element need to be cleaned with the push and clean button time by time. Detailed instruction you could find in the user manual. Manual cleaning by removing the filter is recommended if the filter element becomes extremely dirty. 1.11 Regular servicing and inspection Regular servicing and inspection of your machine must be carried out by suitably qualified personnel in accordance with relevant legislation and regulations. In particular, electrical tests for earth continui-ty, insulation resistance, and condition of the flexible cord should be checked frequently. In the event of any defect, the machine MUST be withdrawn from service, completely checked and repaired by an authorized service technician. At least once a year, a Makita technician or an instructed person must perform a technical inspection including filters, air tightness and control mechanisms. For details of after sales service contact your dealer or Makita service representative responsible for your country. See reverse of this document. 1.12 Certification an standards The VC3012L and VC4210L are certified by CSA international and complies with the following standards: • CAN/CSA-C22.2 NO. 60335-1-11 • CSA E60335-2-69-01 • ANSI/UL STD. 1017 The VC2512L is certified by Intertek and complies with the following standards: • CAN/CSA-C22.2 NO. 60335-1-11 • CSA E60335-2-69-01 1.13 Warranty Our general conditions of business are applicable with regard to the guarantee. Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage. 1)OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model 9 Original instruction