Makita XBU02PT XBU02 Instruction Manual - Page 3

4. Never point the nozzle at anyone in the vicinity when using the blower. 5. Never block suction inlet and/or blower outlet. • Do not block suction inlet or blower outlet to clean up in dusty areas. • Do not use the blower with a tapered nozzle smaller than the original one, such as a new nozzle obtained by attaching an extra diameter-reduced hose or smaller hose to the nozzle top end. • Do not Use the blower to inflate balls, rubber boat or the similar. Increased motor revolution may cause dangerous fan breakage and result in serious personal injury. Heated motor and control circuit may cause a fire. 6. AVOID UNINTENTIONAL STARTING. Do not carry battery fitted tool with finger on switch. 7. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. 8. Make sure that there are nobody around you when you work at high places. 9. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 10. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. 11. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 12. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 13. Do not handle charger, including charger plug, and charger terminals with wet hands. 14. Do not charge the battery outdoors. SAVE THESE INSTRUCTIONS. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. USD305-1 Symbols The followings show the symbols used for tool. ･ volts ･ direct current ENC007-8 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It 3