Makita XHU07Z XHU07 XHU08 Instruction Manual - Page 15

Grease lubrication Interval of lubrication: Every 100 operating hours 1. Remove 3 screws, and then remove the bottom cover. 2 1 ► 1 . Screw 2. Bottom cover 2. Remove the cap from the grease vessel, and then attach the grease vessel to the hole on the cover by turning the grease vessel. NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country. MAKITA LIMITED WARRANTY Please refer to the annexed warranty sheet for the most current warranty terms applicable to this product. If annexed warranty sheet is not available, refer to the warranty details set forth at below website for your respective country. United States of America: www.makitatools.com Canada: www.makita.ca Other countries: www.makita.com 1 2 ► 1 . Cover 2. Grease vessel 3. Apply the grease to the tool (Approximately 5 g (0.2 oz) as a guide). 4. Remove the grease vessel. 5. Attach the bottom cover, and then tighten 3 screws. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. • Shear blade assembly • Shear blade cover • Chip receiver • Grease vessel • Makita genuine battery and charger 15 ENGLISH