Makita XOB01 XOB01 Instruction Manual - Page 6

1. Dust nozzle 1 003326 After emptying the dust bag, install the dust nozzle on the dust bag. Turn the dust nozzle slightly clockwise to lock it in place. Then install the dust bag on the tool as described in "Installing dust bag". Installing paper filter bag (Optional accessory) 1. Holding tab 009093 Remove the paper filter bag first by pinching the logo side of its cardboard lip, then by pulling the cardboard lip downwards to move it out of the holding tab of the dust box. Removing and reinstalling the skirt CAUTION: Do not use the tool without the skirt. Otherwise dust is scattered all over. 1 009094 Make sure that the logo on the cardboard lip and the logo on the dust box are on the same side, then install the paper filter bag by fitting the cardboard lip in the groove of each holding tab. 1. Dust box 1 2. Dust nozzle 012881 You can choose one of 12 directions of the skirt in accordance with your purpose. 1. Skirt 2. Screw 1 2 009095 Make sure that the logo on the cardboard lip and the logo on the dust nozzle are on the same side, then install the dust nozzle on the dust box. Removing dust box and paper filter bag 1. Latch 2. Dust nozzle 2 012885 To remove the skirt, remove the screw and remove the skirt with slightly opening it for both sides. 1. Skirt 1 2 009092 Remove the dust nozzle by pushing the two latches. 1 012945 To reinstall the skirt, install it with slightly opening it for both sides. And fasten the screw. 6