Makita XPT02Z XPT02 Instruction Manual - Page 2

Specifications

Page 2 highlights

ENGLISH (Original instructions) SPECIFICATIONS Model XPT02 Impact driver mode Fastening Capacities Machine screw Standard bolt 4 mm - 8 mm (5/32" - 5/16") 5 mm - 14 mm (3/16" - 9/16") High tensile bolt 5 mm - 12 mm (3/16" - 15/32") No load speed (/min) (Soft / Medium / Hard) 0 - 1,300 / 0 - 2,200 / 0 - 2,700 Impacts per minute (Soft / Medium / Hard) 0 - 1,200 / 0 - 2,400 / 0 - 3,200 Hammer drill mode No load speed (/min) (Low (1) / High (2)) 0 - 700 / 0 - 2,700 Blows per minute (Low (1) / High (2)) 0 - 8,400 / 0 - 32,400 Drilling Capacities / Concrete 8 mm (5/16") Drill mode Drilling Capacities (Low (1) / High (2)) Steel Wood 10 mm / 6.5 mm (3/8" / 1/4") 21 mm / 12 mm (13/16" / 15/32") No load speed (/min) (Low (1) / High (2)) 0 - 700 / 0 - 2,700 Screwdriver mode Fastening Capacities (Low (1) / High (2)) Machine screw Self drilling screw 3.5 mm - 6 mm / 4 mm - 6 mm (1/8" - 1/4" / 5/32" - 1/4") 4 mm (5/32"), 5 mm (3/16") / 4 mm (5/32") (Thickness 3.2 mm (1/8") max.) No load speed (/min) Depends on torque (Low (1) / High (2)) setting 0 - 300 / 0 - 1,100 P mode 0 - 600 / 0 - 2,300 Standard battery cartridge BL1815N/ BL1820B BL1830/ BL1830B/ BL1840B/ BL1850B/ BL1860B Net weight 1.5 kg (3.3 lbs) 1.8 kg (3.9 lbs) Rated voltage D.C. 18 V • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. • Weight, with battery cartridge, according to EPTA-Procedure 01/2003 General power tool safety warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Electrical Safety 1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 5. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 6. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. 2 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

2
ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
XPT02
Impact driver mode
Fastening
Capacities
Machine screw
4 mm - 8 mm (5/32" - 5/16")
Standard bolt
5 mm - 14 mm (3/16" - 9/16")
High tensile bolt
5 mm - 12 mm (3/16" - 15/32")
No load speed (/min) (Soft / Medium / Hard)
0 - 1,300 / 0 - 2,200 / 0 - 2,700
Impacts per minute (Soft / Medium / Hard)
0 - 1,200 / 0 - 2,400 / 0 - 3,200
Hammer drill mode
No load speed (/min) (Low (1) / High (2))
0 - 700 / 0 - 2,700
Blows per minute (Low (1) / High (2))
0 - 8,400 / 0 - 32,400
Drilling Capacities / Concrete
8 mm (5/16")
Drill mode
Drilling Capacities
(Low (1) / High (2))
Steel
10 mm / 6.5 mm (3/8" / 1/4")
Wood
21 mm / 12 mm (13/16" / 15/32")
No load speed (/min) (Low (1) / High (2))
0 - 700 / 0 - 2,700
Screwdriver mode
Fastening Capacities
(Low (1) / High (2))
Machine screw
3.5 mm - 6 mm / 4 mm - 6 mm (1/8" - 1/4" / 5/32" - 1/4")
Self drilling screw
4 mm (5/32"), 5 mm (3/16") / 4 mm (5/32") (Thickness 3.2 mm (1/8") max.)
No load speed (/min)
(Low (1) / High (2))
Depends on torque
setting
0 - 300 / 0 - 1,100
P mode
0 - 600 / 0 - 2,300
Standard battery cartridge
BL1815N/ BL1820B
BL1830/ BL1830B/ BL1840B/
BL1850B/ BL1860B
Net weight
1.5 kg (3.3 lbs)
1.8 kg (3.9 lbs)
Rated voltage
D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change with
-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
General power tool safety warnings
WARNING:
Read all safety warnings and
all instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust.
Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet con-
ditions.
Water entering a power tool will increase
the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply.
Use of a GFCI
reduces the risk of electric shock.