Makita XSL05Z XSL05 Instruction Manual - Page 15

Switch action WARNING: Before installing the battery cartridge on the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. Operating a tool with a switch that does not actuate properly can lead to loss of control and serious personal injury. WARNING: NEVER use tool without a fully operative switch trigger. Any tool with an inoperative switch is HIGHLY DANGEROUS and must be repaired before further usage or serious personal injury may occur. WARNING: For your safety, this tool is equipped with a lock-off button which prevents the tool from unintended starting. NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off button. A switch in need of repair may result in unintentional operation and serious personal injury. Return tool to a Makita service center for proper repairs BEFORE further usage. WARNING: NEVER defeat the lock-off button by taping down or some other means. A switch with a negated lock-off button may result in unintentional operation and serious personal injury. NOTICE: Do not pull the switch trigger hard without pressing in the lock-off button. This can cause switch breakage. To prevent the switch trigger from being accidentally pulled, a lock-off button is provided. To start the tool, press in the lock-off button and pull the switch trigger. Release the switch trigger to stop. 1 2 Lighting up the lamp CAUTION: This is not a rainproof light. Do not wash the light in water or use it in a rain or a wet area. Such a conduct can cause an electric shock and fume. CAUTION: Do not touch the lens of the light, as it is very hot while it is lighted or shortly after it is turned off. This may cause a burn to a human body. CAUTION: Do not apply impact to the light, which may cause damage or shorted service time to it. CAUTION: Do not keep casting the beam of the light to your eyes. This can cause your eyes to be hurt. CAUTION: Do not cover the light with clothes, carton, cardboard or similar objects while it is lighted, which can cause a fire or an ignition. CAUTION: Do not look in the light or see the source of light directly. To turn on the lamp, press the upper position (I) of the switch. To turn off the lamp, press the lower position (0) of the switch. 1 2 3 ► 1 . Lock-off button 2. Hole for padlock 3. Switch trigger ► 1 . Lamp 2. Lamp switch NOTE: Use a dry cloth to wipe the dirt off the lens of the lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination. NOTE: Be sure to turn off the switch as turning on the switch consumes the battery power. Laser beam action CAUTION: Never look into the laser beam. Direct laser beam may injure your eyes. To turn on the laser beam, press the upper position (I) of the switch. To turn off the laser beam, press the lower position (0) of the switch. 15 ENGLISH