Makita XUX01Z XUX01 Instruction Manual - Page 9

Mounting the attachment pipe Mount the attachment pipe to the power unit. 1. Turn the lever toward the cutting attachment. 1 3 1 ► 1 . Lever 2. Align the pin with the arrow mark and insert the attachment pipe until the release button pops up. 1 2 3 2 Fig.12 ► 1 . Release button 2. Lever 3. Pipe Adjusting the handle/hanger position Adjust the handle and hanger position to obtain confortable handling of the tool. Loosen the hex socket head bolt on the handle. Move the handle to a comfortable working position and then tighten the bolt. 1 ► 1 . Release button 2. Arrow mark 3. Pin 3. Turn the lever toward the power unit. 2 ► 1 . Handle 2. Hex socket head bolt Loosen the hex socket head bolt on the hanger. Move the hanger to a comfortable working position and then tighten the bolt. 1 ► 1 . Lever Make sure that the surface of the lever is parallel to the pipe. To remove the pipe, turn the lever toward the cutting attachment and pull the pipe out while pressing down the release button. 2 1 ► 1 . Hex socket head bolt 2. Hanger 9 ENGLISH