Makita XWT08M XWT07/XWT08/XWT09 Instruction Manual - Page 7

Changing the impact force

Get Makita XWT08M PDF manuals and user guides View all Makita XWT08M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

CAUTION: Always check the direction of rotation before operation. CAUTION: Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. CAUTION: When not operating the tool, always set the reversing switch lever to the neutral position. Changing the impact force This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled. 1 2 5 3 4 ► 1 . Changed in three steps 2. Hard 3. Medium 4. Soft 5. Button You can change the impact in three steps: hard, medium and soft mode. This allows a tightening suitable to the work. Every time the button is pressed, the number of blows changes in three steps. For approximately one minute after releasing the switch trigger, the impact force can be changed. Specifications of each impact force grade Impact force grade displayed on panel Hard Maximum blows XWT07 XWT08 XWT09 2,200 min-1 (/min) Application Tightening when force and speed are desired. Medium 2,000 min-1 (/min) Tightening when you need good controlled power. Soft 1,800 min-1 (/min) Tightening when you need fine adjustment with small diameter bolt. 7 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
7
ENGLISH
CAUTION:
Always check the direction of
rotation before operation.
CAUTION:
Use the reversing switch only after
the tool comes to a complete stop.
Changing the
direction of rotation before the tool stops may dam-
age the tool.
CAUTION:
When not operating the tool,
always set the reversing switch lever to the neu-
tral position.
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for coun
-
terclockwise rotation.
When the reversing switch lever is in the neutral posi
-
tion, the switch trigger cannot be pulled.
Changing the impact force
1
2
3
4
5
►
1.
Changed in three steps
2.
Hard
3.
Medium
4.
Soft
5.
Button
You can change the impact in three steps: hard, medium and soft mode.
This allows a tightening suitable to the work.
Every time the button
is pressed, the number of blows changes in three steps.
For approximately one minute after releasing the switch trigger, the impact force can be changed.
Specifications of each impact force grade
Impact force grade displayed on
panel
Maximum blows
Application
XWT07
XWT08
XWT09
Hard
2,200 min
-1
(/min)
Tightening when force and speed are desired.
Medium
2,000 min
-1
(/min)
Tightening when you need good controlled power.
Soft
1,800 min
-1
(/min)
Tightening when you need fine adjustment with
small diameter bolt.