Makita XWT08M XWT07/XWT08/XWT09 Instruction Manual - Page 8

Impact force/bolt size corresponding chart (reference) Impact force grade displayed on panel Hard XWT07 Standard bolt High tensile bolt M20 - M30 M16 - M24 (3/4″ - 1-1/4″) (5/8″ - 1″) XWT08 Standard bolt High tensile bolt M20 - M30 M16 - M24 (3/4″ - 1-1/4″) (5/8″ - 1″) XWT09 Standard bolt High tensile bolt M20 - M24 (3/4″ - 1″) M16 - M22 (5/8″ - 7/8″) Medium M16 - M24 (5/8″ - 1″) M12 - M20 (1/2″ - 3/4″) M16 - M24 (5/8″ - 1″) M12 - M20 M14 - M20 M10 - M16 (1/2″ - 3/4″) (9/16″ - 3/4″) (3/8″ - 5/8″) Soft M12 - M20 M10 - M16 M12 - M20 M10 - M16 M12 - M16 M10 - M12 (1/2″ - 3/4″) (3/8″ - 5/8″) (1/2″ - 3/4″) (3/8″ - 5/8″) (1/2″ - 5/8″) (3/8″ - 1/2″) ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Selecting correct impact socket Always use the correct size impact socket for bolts and nuts. An incorrect size impact socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut. Installing or removing impact socket Only for Model XWT07,XWT08 (optional accessory) CAUTION: Make sure that the impact socket and the mounting portion are not damaged before installing the impact socket. For impact socket without O-ring and pin 1 2 To remove the impact socket, simply pull it off. For impact socket with O-ring and pin Only for Model XWT07 1 3 2 ► 1 . Impact socket 2. O-ring 3. Pin Move the O-ring out of the groove in the impact socket and remove the pin from the impact socket. Fit the impact socket onto the square drive so that the hole in the impact socket is aligned with the hole in the square drive. Insert the pin through the hole in the impact socket and square drive. Then return the O-ring to the original position in the impact socket groove to retain the pin. To remove the impact socket, follow the installation procedures in reverse. ► 1 . Impact socket 2. Square drive Align the square of the impact socket with the square drive and push the impact socket onto the square drive until it locks into place. Tap it lightly if required. 8 ENGLISH