Marantz AV7005 AV7005 User Manual - English - Page 82
Speaker Setup
View all Marantz AV7005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Manual Setup Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select MultEQ XT, Dynamic EQ and Dynamic Volume (vpage 74, 75). • Manual Setup can be used without changing the settings. Please set if necessary. nnAudio output from each PRE OUT terminal PRE OUT Channel UNBALANCED PRE OUT terminal FL/FR C SW1/SW2 SL/SR SBL/SBR BALANCED PRE OUT terminal FL/FR C SW1/SW2 SL/SR SBL/SBR Audio Output Front A Center Subwoofer 1 / Subwoofer 2 Surround Surround Back* HL/HR WL/WR --- --- Front Height / Front B Front Wide *The output audio differs depending on the "Amp Assign" settings. Setting items Setting details Amp Assign Set the speakers connected to the UNBALANCED and BALANCED PRE OUT SBL/ SBR terminals of the power amp. Normal : Set when using surround back, front height or front wide speakers. ZONE2 : Set for connecting the speakers for ZONE2. ZONE3 : Set for connecting the speakers for ZONE3. SPKR-C : Set for connecting the tweeter of the front speaker to the UNBALANCED and BALANCED PRE OUT SBL/SBR terminals of the power amp, and the woofer of the front speaker to the FL/FR terminals. Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use a large speaker that can adequately play back low and size (bass reproduction frequencies. capability). • Small : Use a small speaker that has inadequate playback capacity for NOTE low frequencies. Do not use the outward shape of the speaker to • When "Subwoofer" is set to "No", "Front" is automatically set to determine selection of a "Large". "Large" or "Small" speaker. • When "Front" is set to "Small", "Center", "Surround", "S.Back", Instead, use the frequencies "F.Height" and "F.Wide" can not be set to "Large". set in "Crossover Center : Set the presence and size of the center speaker. Frequency" (vpage 80) as • Large : Use a large speaker that can adequately play back low the standard for determining frequencies. bass reproduction capability. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes". Setting items Speaker Config. (Continued) Setting details Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. • When "Surround" is set to "Large", "S.Back", "F.Height" and "F.Wide" can be set to "Large". • When "Surround" is set to "None", "S.Back", "F.Height" and "F.Wide" can automatically set to "None". S.Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2spkrs : Use two surround back speakers. • 1spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel. Even when the "S.Back" setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. NOTE When "Amp Assign" setting (vpage 78) is other than "Normal", you cannot make the "S.Back" setting. F.Height : Set the presence and size of the front height speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the front height speakers are not connected. NOTE When "Amp Assign" setting (vpage 78) is other than "Normal", you cannot make the "F.Height" setting. 78 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu