Marantz AV8802 Owner's Manual in English - Page 179

Contents Connections Playback o Dynamic Compression Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off. 0 "Dynamic Compression" can be set when Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is input. 0 The default setting is "Off". When the input signal is the Dolby TrueHD or Dolby Atmos source, the default setting is "Auto". 0 This can be set when "Loudness Management" is set to "On". Settings Tips Appendix o Low Frequency Effects Adjust the low frequency effects level (LFE). n When "Input Mode" is set other than to "7.1CH IN" -10 dB - 0 dB (Default : 0 dB) n When "Input Mode" is set to "7.1CH IN" 0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB) For proper playback of the different sources, we recommend setting to the values below. 0 Dolby Digital sources : 0 dB 0 DTS movie sources : 0 dB 0 DTS music sources: -10 dB o Center Gain Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. 0.0 - 1.0 0 You can set this when the sound mode is set to DTS Neo:X. 0 The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front. Front panel Display Rear panel 179 Remote Index