Marantz AV8802 Owner's Manual in English - Page 237
Network, Information, Connection
View all Marantz AV8802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set "DHCP" to "On". (Use the default setting.) This allows this unit to use your home network (LAN). When assigning an IP address to each device manually, you need to assign an IP address to this unit using the "IP Address" settings, and enter information about your home network (LAN) such as the gateway address and subnet mask, etc. Information Display network information. Friendly Name / Connection / SSID / DHCP / IP Address / MAC Address o Connect Using Select the method for connecting to the home network (LAN). Wired (Ethernet): Use a LAN cable to connect to a network. Wireless (Wi-Fi): Use the wireless LAN (Wi-Fi) function to connect to a network. MAC Address is required to create a vTuner account. Connection Choose whether to connect the home network to a wireless LAN or a wired LAN. When connecting to the network using wired LAN, select "Wired (Ethernet)" after connecting a LAN cable, When connecting to the network using wireless LAN, select "Wireless (WiFi)" and configure the "Wi-Fi Setup". You can disable the Wi-Fi function of this unit by configuring the following settings. 1. Press and hold the main unit's STATUS and ZONE SELECT at the same time for at least 3 seconds. "zVideo Format " appears on the display. 2. Use the main unit's i to display "zWired LAN ". 3. Use the main unit's o or p to select "". 4. Press the main unit's ENTER to complete the setting. Front panel Display Rear panel 237 Remote Index