Marantz AV8802A Owner s Manual in English - Page 259
Trigger Out 1 / Trigger Out 2, Auto Standby
View all Marantz AV8802A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Contents Connections Playback Settings Tips Appendix Trigger Out 1 / Trigger Out 2 Select the conditions for activating trigger out. For details about how to connect the DC OUT jacks, see "DC OUT jacks" (v p. 81). n When setting for zone (MAIN ZONE / ZONE2 / ZONE3) Trigger out is activated through linkage to the power of the zone set to "On". n When setting for input source Activates trigger out when the input source set to "On" is selected. n When setting for HDMI monitor Activates trigger out when the HDMI monitor set to "On" is selected. On: - - -: Activate trigger on this mode. Do not activate trigger on this mode. Auto Standby Set so the unit power automatically switches to standby. o MAIN ZONE Sets the time for switching to auto standby when there are no audio or video signals input into this unit. Before the unit enters standby mode, "Auto Standby" is displayed on the unit display and the menu screen. 60 min: The unit goes into standby after 60 minutes. 30 min: The unit goes into standby after 30 minutes. 15 min: The unit goes into standby after 15 minutes. Off (Default): The unit does not go into standby automatically. o ZONE2 / ZONE3 When there are no operations for a certain period of time as set here, the power is automatically shut off even if there is audio or video input. 8 hours: Switches ZONE2/ZONE3 the standby state after about 8 hours. 4 hours: Switches ZONE2/ZONE3 to the standby state after about 4 hours. 2 hours: Switches ZONE2/ZONE3 to the standby state after about 2 hours. Off (Default): Does not automatically switch ZONE2/ ZONE3 to the standby state. Front panel Display Rear panel 259 Remote Index