Marantz CD-110 CD110 USER'S MANUAL - Page 16

11

ENGLISH

PROGRAM PLAY

LISTENING TO FAVORITE TRACKS IN A FAVORITE

ORDER

This function cannot be used with MP3 discs.

–

Random play cannot be used with program play.

–

AMS cannot be used with program play.

1.

When the

PROG.

button

!5

is pressed in the stop mode,

the "PROG" indicator flashes, and the program mode is

established.

2.

Select the tracks to be programmed using the numeric

buttons or

4

and

¢

buttons

!1

on the remote control

unit.

(They can also be selected using the

4

/

1

and

¡

/

¢

buttons

,

on the main unit.)

When the tracks are to be selected using the

4

and

¢

buttons

!

1

on the remote control unit (or

4

/

1

and

¡

/

¢

buttons

,

on the main unit), first select the tracks, and

then press the

PROG.

button

!

5

.

* To input a 2-digit track number to select a track using the

numeric buttons, first input the 10's digit and, within 2

seconds, input the 1's digit.

(Example: When selecting track number 5 as the first track

and its play time is 3 min. 39 sec.)

3.

Then, repeat step 2 for the next track and so on to program

up to 30 tracks.

4.

Upon completion of all the programming, press the

3

button

!

0

.

The selected tracks are now played in the programmed

order.

Note:

If track 31 or higher is included in a program, the time display

will read "--:--" from that point on.

If the program total time exceeds 99 minutes, the time

display will read "--:--".

PROG

CD

TRACK

TOTAL

TIME

flashes

TO CHECK THE PROGRAM CONTENTS

Press the

PROG.

button

!5

during programming.

Each time this button is pressed, the tracks will be displayed

one after the other in the sequence in which they were

programmed.

TO CLEAR A PROGRAMMED TRACK

Press the

CANCEL

button

!6

during programming.

Each time this button is pressed, the tracks will be deleted one

at a time in sequence starting with the one programmed last.

TO CLEAR THE ENTIRE PROGRAM

To clear the entire program, either press the

0

button

n

on the

main unit, or else press the

CANCEL

button

!6

on the remote

control unit three times.

TO ADD TO THE PROGRAM

Select the track or tracks to be added using the numeric buttons

or the

4

and

¢

buttons

!1

on the remote control unit (or

4

/

1

and

¡

/

¢

buttons

,

on the main unit) while the unit

is in the stop mode (while "PROG" is lighted) when there is

room for more tracks in the program.

To select a track using the

4

and

¢

buttons

!1

on the

remote control unit (or

4

/

1

and

¡

/

¢

buttons

,

on the

main unit), first select the track, and then press the

PROG.

button

!5

.

The newly added track is added to the end of the program.

If, when using the numeric buttons to select tracks 1

through 9 on a disc with 10 or more tracks in total, track

number 3 is to be selected after track number 1, for

example, first press the numeric button "

1

" and then wait at

least 2 seconds before pressing "

3

."

When selecting track number 10 or higher such as track

number 13, first press the numeric button "

1

" and then

press "

3

" before allowing 2 seconds to elapse.

When using the

4

and

¢

buttons

!1

on the remote

control unit (or

4

/

1

and

¡

/

¢

buttons

,

on the

main unit) for programming, first select the number of the

desired track, and then press the

PROG.

button

!5

to enter

it.

REPEAT DURING PROGRAM PLAY

If all track repeat is selected, all of the tracks in the program are

repeated, not all of the tracks on the disc.

PROG

CD

TRACK

TOTAL

TIME

PROG

CD

TRACK

TOTAL

TIME

Track number

Program number

Marantz CD-110 CD110 USER'S MANUAL - Page 16

Program Play

Page 16 highlights