Marantz M-CR611 Owners Manual English - Page 31
Wireless LAN
View all Marantz M-CR611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Contents Connections Playback Wireless LAN Internet Modem To WAN side Router with access point Settings Tips Appendix 0 With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. 0 When using this unit with the broadband router's DHCP function enabled, this unit automatically performs the IP address setting and other settings. When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at "Network". (v p. 107) 0 When using this unit, we recommend you use a router equipped with the following functions: 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. 0 Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores. (CAT-5 or greater recommended) 0 The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise. 0 When using a WPS (Wi-Fi Protected Setup) compatible router, you can connect easily to Wi-Fi by pressing the Wi-Fi CONNECT button (WPS) on this unit. (See the separate "Quick Setup Guide".) . Front/Top panel Rear panel Remote control 31 unit Index