Marantz PM-15S2 PM-15S2 User Manual - English - Page 10

NAMES AND FUNCTIONS BASIC CONNECTIONS ENGLISH NAMES AND FUNCTIONS FRONT PANEL q w er t yu i o BASIC OPERATIONS ADVANCED CONNECTIONS ADVANCED OPERATIONS TROUBLESHOOTING !0 !4 !3 !2 !1 !0 q INPUT SELECTOR Knob This knob is for selecting the input source to use in playback and recording. The selected input source is displayed in the display. i ATT Button This button attenuates the volume with one press of the button. For instructions on How to Set the Attenuation Level, see page. 19. w DISPLAY Button This button turns the display and side illumination ON and OFF. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 19. e TONE Button This button turns the tone control ON or OFF. r SPEAKERS Button This button turns the speaker output to the speakers connected to the SPEAKER SYSTEMS terminals on the rear panel ON or OFF. To listen with headphones, turn speaker output OFF with this button. t Display Indicate the selected input source, volume level, and setting status. y PHONO MC Button This button switches the phono equalizer between MC and MM. When MC is set, the center of the button is lit a blue color. Set the phono equalizer amplifier according to the type of cartridge you use. u P.DIRECT IN Button To use this unit as a power amplifier, hold this button pressed for at least 3 seconds until the indicator lights. While this unit serves as a power amplifier, the volume level cannot be adjusted with the VOLUME knob. To cancel power amplifier direct mode, hold this button pressed again for at least 3 seconds. See also t P.DIRECT IN Jacks, page 7. o VOLUME Knob This knob is for setting the volume. The volume level is displayed on the display. During power amplifier direct mode, the volume cannot be changed. !0 Illumination Lamp The illumination lamp casts a blue light over the switches and buttons. It can be turned ON and OFF with the DISPLAY button. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see page. 19. !1 Tone Control Knobs (BASS, TREBLE) These knobs control bass and treble tones. The bass and treble tones are increased as the corresponding knobs are turned clockwise and decreased as they are turned counterclockwise. When the TONE button is set to OFF, the tone cannot be controlled. !2 POWER ON/OFF Switch This switch turns power to the unit ON and OFF. When pressed, power is activated and the blue indicator in the display lights up. Pressing the switch again turns the power OFF. !3 Infrared Receptor Window This receptor window receives control signals sent from the included remote controller. !4 PHONES Jack This jack is for connecting headphones with a standard stereo plug. 4 OTHERS