Marantz RC1200 User Guide - Page 18

ENGLISH POWER SOURCE ON ON / OFF OFF LEARNING REMOTE CONTROL RC 1200 MACRO MODE 2. Erasing by Button(s) To clear the codes and names programmed in any of the buttons • Press the button concerned twice while holding down the CLEAR button ⁄5. When the codes are cleared, the button returns to its factory presets or it is left empty. Jog Dial codes can be cleared in the same way: turn the Jog Dial to call up the name of the command whose codes are to be erased, and press the ENT button n (either the left one or the right one) twice while holding down the CLEAR button ⁄5, and the codes and command names memorized in the button will be cleared. When the codes are cleared, the button returns to its factory presets or it is left empty. • To erase codes programmed for the CLEAR button ⁄5, simply press the CLEAR button ⁄5 continuously for 3 seconds. As an example, let's clear the PLAY command from the laser disc player command set. 1. While holding down the CLEAR button ⁄:5 w CH OK VOL CD DVD CD-R/MD DSS TV VCR AUX L D TUNER TAPE AMP q CLEAR MEMO AUTO DOLBY THX 123 GUIDE DTS 4 MUTE HALL 5 2. Press the OK Cursor button ⁄0 twice.