Marantz RC3001 User Guide - Page 8

ENGLISH CHARGING THE BATTERY PACK Once the rechargeable battery pack is loaded, power is immediately supplied automatically to the remote controller, and Home mode is displayed on the LCD. When it is first unpacked, the supplied battery pack is not fully charged. Be sure to fully charge it before usage. Also, if the remaining power is low, the remaining power level indicator at the bottom right of the LCD changes to the LOW BATTERY warning. Charge the battery pack as soon as this warning is displayed. 2. Remove the bottom cover of the remote controller, and connect the AC adapter to the charging terminal next to the USB port. USB port AC adapter Bottom cover 3. Charging starts as soon as the AC adapter is plugged into a household outlet. The battery indicator changes to indicate the charging status. It takes about three hours to fully charge the battery pack. 4. After charging is completed, the battery indicator shows a full charge. Disconnect the AC adapter from the remote controller. 1. Connect the AC plug adapter matching your usage region to the supplied AC adapter. AC plug adapter for USA region AC plug adapter for European region AC adapter Notes: • When charging the remote controller, be sure to always use the supplied AC adapter. • Do not try to charge devices other than the remote controller with the supplied AC adapter. This could damage the AC adapter or the connected device. • Remote controller operation is possible even when charging. • The settings remain saved in the remote controller even if the power completely runs out. However, the time setting will be lost, and so please set the time setting again. • Although it is not a problem if the remote controller is recharged before the power completely runs out, to prolong the lifespan of the rechargeable battery, charging is recommended after lLOWz is displayed. 3