Marantz SA-7S1 SA-7S1 User Manual - English - Page 16

ENGLISH CONNECTIONS Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection please refer to instruction manuals of stereo system to be connected. Caution: Do not connect output from this unit to PHONO input of your audio system. 1. Connect the audio cable q to this unit's front speaker outputs and the stereo inputs on your amplifier, receiver or stereo system. 2. Connect the optical cable w, coaxial cable e to the digital input on your AV amplifier, D/A converter, CD-R, etc.. * Signal will be output from the digital audio out jacks (OPT./COAX.) only when an Audio CD disc is played. No signal is output when playing a Super Audio CD. 3. When connecting to an external master clock generator, use the BNC terminal coaxial cable (75Ω) r. * Signals are output from the DIGITAL OUTPUTS connector (OPT., COAX.) only when an audio CD is being played. No signal is output when playing a super audio CD. (red) To Analog Audio output (white) Balanced connection cord (Optional) Audio cable q (Supplied) To audio input terminals on amplifier BALANCED CD LINE 1 LINE 2 INPUT SELECTOR RECORDER input selector A SYNC B power on/off To Digital Audio output w Optical cable (Optional) To balanced input terminals on amplifier DISPLAY ATT volume e Coaxial cable (Optional) r BNC terminal coaxial cable (75Ω) Connect to digital input terminals of receiver, D/A converter or CD recorder, etc.. Connect to master clock generator Left speaker Right speaker 11