Marantz SM-11S1 SM-11S1 User Manual - English - Page 12

ENGLISH NAMES AND FUNCTIONS OF PARTS REAR PANEL G UNBALANCED INPUT R L AMP MODE STEREO BTL BTL BALANCED INPUT R PUSH L PUSH 3 2 1 3 2 1 BTL SPEAKER SYSTEMS R CH 1 L CH BTL R CH 2 L CH F MODEL NO. SM-11S1 AC IN REMOTE POWER CONTROL TRIGGER IN ON OFF A B C DE A UNBALANCED INPUT Jack These jacks are for connecting to the unbalanced output jacks of a control amplifier. In BTL mode, the Lch input terminal is used. B BALANCED INPUT Jacks These jacks are for connecting to the balanced output jacks of a control amplifier. In BTL mode, the Lch input terminal is used. C SPEAKER SYSTEMS Output Terminals These jacks are for connecting to a speaker system. You can connect 2 speaker systems to the SM-11S1, SPEAKER SYSTEM 1 and 2. Speaker output can be turned ON/OFF from the SPEAKERS 1 / 2 buttons on the front panel. When using BLT mode, connect the speaker + side to the Lch + jack, and the speaker - side to the Rch + jack. D REMOTE POWER CONTROL Jacks (TRIGGER IN) This jack controls this unit's power ON/OFF in sync with the Marantz SC-11S1 control amplifier ON/OFF control. Connect to the SC-11S1 TRIGGER OUT jack using a commercially available cable. For more information on REMOTE POWER CONTROL, see pg. 20. E REMOTE POWER CONTROL ON/OFF Switch ON: Set to control this unit's power ON/OFF in sync with the Marantz SC-11S1 control amplifier ON/OFF control. OFF: Set to use the POWER ON/OFF switch on the front panel of the unit to switch the unit's power ON/OFF. F AC IN Power Cable Connection Socket Connect this socket to the power outlet using the included power cable. G AMP MODE Switch STEREO: Set to use the SC-11S1 as an ordinary stereo power amplifier. BTL: Set to connect a stereo amp by BTL and use this unit as a monaural power amp. For more information on AMP MODE, see pg. 19. Caution: Always make sure that the power is OFF before switching this switch. 6