Marantz SM-11S1 SM-11S1 User Manual - English - Page 26

ENGLISH HOW TO USE AND SET FEATURES REMOTE POWER CONTROL By connecting this unit to a Marantz SC-11S1 stereo control amplifier using the remote power control connection, the power controls of this unit are operated in sync with the SC-11S1 power ON/OFF controls. The SC-11S1 has two trigger output terminals, therefore two SM-11S1s can be connected to one SC-11S1. 1. Prepare the correct number of double-ended mini plug audio connection cables for the number of SM-11S1s to be connected. Either of the following types of connection cables are adequate. Caution: Do not use connecting cables that contain resistance. • Monaural miniplug ˱ monaural miniplug connecting cable 2. Check that the power to the unit and SC-11S1 that will be connected to it are both OFF. 3. After completing the connections shown below, switch the remote power control ON/OFF switch on the rear panel of the unit to ON. 4. Press the POWER ON/OFF switch on the unit to switch to standby mode. 5. In this condition, press the POWER ON/OFF switch on the SC-11S1, and the power of the SM-11S1 will switch ON in sync. • Stereo miniplug ˱ stereo miniplug connecting cable SC-11S1 SM-11S1 SM-11S1 AC IN TRIGGER OUT 12 REMOTE POWER CONTROL TRIGGER OUT 12 REMOTE POWER CONTROL AC IN REMOTE POWER CONTROL TRIGGER IN ON OFF AC IN REMOTE POWER CONTROL TRIGGER IN ON OFF REMOTE POWER CONTROL ON OFF TRIGGER IN Set to ON REMOTE POWER CONTROL ON OFF TRIGGER IN Set to ON 20