Marantz SR-880mkII User Guid - Page 20
Multi, Selector, Operation, listen, multi
View all Marantz SR-880mkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Multi Room Selector The Multi Room Selector is a function which allows you to listen to the same or a different source in a room other than the room in which the SR880mkIl is located. To use this function, multi room remote control unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below. For details, refer to the instruction manual supplied with the multi room remote control unit and receiver. 1. Press the MULTI ROOM button O. The unit enters multi room mode and "MULTI" lights on the display. (Multi room mode can be selected even when the SR880mkII POWER switch 0 is set OFF (STANDBY) from the multi room with remote control.) Immediately after pressing the MULTI ROOM button 0 ON, the source can be selected and the output level can be set by following the displayed menus. 1) Press the MULTI ROOM button 0, the display indicates "SEL SOURCE" and flushing the MULTI indicator for about 10 seconds. In this time, you can select the function by pressing the function button (FM/AM, CD, LD, etc) 2) After above, the display indicates "MULTI VOL" "VOLUME xx dB" for about 5 seconds. In this time, you can set the volume level of the multi room. Caution: If the main room is active (not standby mode), you cannot select the band except the band of .the main ropm. For example; if the FM band is selected in the main room, you cannot select the AM band in the multi room. The operating procedure for this is the same as the Multi-room operations using the remote handset. 2. In multi room mode, the multi room remote control unit can be used in the multi room to operate the following functions. You can select a tuner preset channel and tuning up or down, or PLAY PAUSE, FF, REW or STOP a CD player or tape deck connected to the SR880mkII. When operating the tuner, use the PRESET ♦UP and YDOWN buttons 0 to select from CH1 to CH50. Note: If the tuner is selected, one or more radio stations must be memorized in the preset channels. To listen to a CD in the multi room This procedure lets you operate a compatible Marantz CD player connected to the SR880mkII from the multi room. 1. Select CD on the multi room remote control unit. 2. Press CD PLAY on the multi room remote control unit. 3. Press the VOL.UP button on the multi room remote control unit to set an appropriate volume level. • A compatible cassette deck can be operated in the same manner. Note: When using the multi room function, make sure the SR880mkIl's MULTI ROOM remote control jack and the multi room remote control receiver are connected by co-axial cable terminated with RCA plugs. • Always be sure to turn the power off after using the multi room function. When the MULTI-ROOM FUNCTION is operative, POWER to the SR880mkII in the MAIN-ROOM is turned ON. When the MULTI-ROOM function is not being used (or is finished being used) turn MULTIROOM OFF. POWER to the SR880mkII is also turned OFF. Multi Room Selector Operation 1. Press the SR880mkII's MULTI ROOM button 0 or press the multi room remote control unit's MULTI ROOM button, or select the desired source with the selector from the MULTI ROOM. Any of these operations will put the SR880mkII into multi room mode and "MULTI" will light in the display. 2, Press the multi room remote control unit's VOL.UP button to set the desired sound volume. Note: If the Multi-room volume has been set to "FIXED" with "MULTI ROOM VOLUME." in "SETUP MENU 3/3", it is not possible to adjust the volume level from the other room.