Marantz SR5011 Owner s Manual In English - Page 214

Contents Connections Playback Settings Configure the proxy settings and IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to "On" in the default settings of this unit. 0 Set up the IP Address, Subnet Mask, Default Gateway and DNS server information only when assigning a fixed IP address or when connecting to a network without DHCP function. 0 Configure the proxy settings when using a proxy server to connect to the Internet. Network/Settings DHCP Off -IP Address 192.168.001.002 -Subnet Mask 255.255.255.000 -Default Gateway 192.168.001.001 -Primary DNS 192.168.001.001 -Secondary DNS 000.000.000.000 Proxy On(Address) -Address 000.000.000.000 -Port 00000 Save Cancel Configures the network settings manually Settings Tips Appendix o DHCP Selects how to connect to the network. On (Default): Configure the network settings automatically from your router. Off: Configure the network settings manually. o IP Address Set the IP address within the ranges shown below. 0 The Network Audio function cannot be used if other IP addresses are set. CLASS A:10.0.0.1 - 10.255.255.254 CLASS B:172.16.0.1 - 172.31.255.254 CLASS C:192.168.0.1 - 192.168.255.254 o Subnet Mask When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. . Front panel Display Rear panel 214 Remote Index