Marantz SR5013 Owners Manual English - Page 157
Audyssey
View all Marantz SR5013 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Contents Connections Playback Audyssey® Set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see "Explanation of terms" (v p. 263). 0 "MultEQ® XT", "Dynamic EQ", "Reference Level Offset" and "Dynamic Volume" settings are stored for each input source. 0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ® XT", "Dynamic EQ" and "Dynamic Volume" settings cannot be configured. 0 When the sound mode is in "DTS Virtual:X" or sound mode that have "+Virtual:X" in the sound mode name, "MultEQ® XT", "Dynamic EQ" and "Dynamic Volume" settings cannot be configured. 0 This cannot be set when the input mode is set to "7.1CH IN". Settings Tips Appendix o MultEQ® XT MultEQ® XT compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. We recommend the "Reference" setting. Reference (Default): L/R Bypass: Flat: Off: Selects the default calibrated setting with a slight roll off at high frequencies, which is optimized for movies. Selects the reference setting, but bypasses MultEQ® XT on the front left and right speakers. Selects the calibrated setting which is optimized for small rooms where your listening position is closer to the speakers. Do not use "MultEQ® XT". 0 When using headphones, "MultEQ® XT" is automatically set to "Off". Front panel Display Rear panel 157 Remote Index