Marantz SR5013 Owners Manual English - Page 200
Network
View all Marantz SR5013 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set "DHCP" to "On". (Use the default setting.) This allows this unit to use your home network (LAN). When assigning an IP address to each device manually, you need to assign an IP address to this unit using the "IP Address" settings, and enter information about your home network (LAN) such as the gateway address and subnet mask, etc. Information Display network information. Friendly Name / Connection / SSID / DHCP / IP Address / MAC Address (Ethernet) / MAC Address (Wi-Fi) / Wi-Fi signal strength Connection Choose whether to connect the home network to a wireless LAN or a wired LAN. When connecting to the network using wired LAN, select "Wired (Ethernet)" after connecting a LAN cable. When connecting to the network using wireless LAN, select "Wireless (WiFi)" and configure the "Wi-Fi Setup". (v p. 201) o Connect Using Select the method for connecting to the home network (LAN). Wired (Ethernet): Wireless (Wi-Fi) (Default): Use a LAN cable to connect to a network. Use the wireless LAN (Wi-Fi) function to connect to a network. Front panel Display Rear panel 200 Remote Index