Marantz SR6008 Owner's Manual in English - Page 183

General, Language, ZONE2 Setup, Treble, High Pass Filter

Page 183 highlights

Contents Connections Playback General Make various other settings. Language Set the language for display on the menu screen. English (Default) / Français / Español % • "Language" can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3 seconds. "Video Format " appears on the display. 2. Press the main unit's DISPLAY. "GUI Language ENGLISH" appears on the display. 3. Use the main unit's PRESET CH +, - and set the language. 4. Press the main unit's STATUS to complete the setting. Settings Tips Appendix ZONE2 Setup Set the audio to play back with multi-zone (ZONE2). % • The setting values (dB) for "Volume Limit" and "Power On Volume" are what is displayed when "Scale" (vpage 149) in the menu is set to "-79.5dB - 18.0dB". 22Bass Adjust bass tones. -10dB - +10dB (Default : 0dB) 22Treble Adjust treble tones. -10dB - +10dB (Default : 0dB) 22High Pass Filter Make settings for cutting the low range to reduce distortion in the bass. On : The low range is attenuated. Off (Default) : The low range is not attenuated. Front panel Display Rear panel 183 Remote Index

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247

183
Appendix
Tips
Playback
Connections
Contents
Front panel
Display
Rear panel
Index
Remote
Settings
Language
Set the language for display on the menu screen.
English
(Default) /
Français
/
Español
%
“Language” can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1.
Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“Video Format <NTSC>” appears on the display.
2.
Press the main unit’s DISPLAY.
“GUI Language ENGLISH” appears on the display.
3.
Use the main unit’s PRESET CH +, – and set the language.
4.
Press the main unit’s STATUS to complete the setting.
General
Make various other settings.
ZONE2 Setup
Set the audio to play back with multi-zone (ZONE2).
%
The setting values (dB) for “Volume Limit” and “Power On Volume” are what is
displayed when “Scale” (
v
page 149) in the menu is set to “–79.5dB – 18.0dB”.
2
Bass
Adjust bass tones.
–10dB – +10dB
(Default : 0dB)
2
Treble
Adjust treble tones.
–10dB – +10dB
(Default : 0dB)
2
High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On
: The low range is attenuated.
Off
(Default) : The low range is not attenuated.