Marantz SR6008 Owner's Manual in English - Page 184
Lch Level, Channel, HDMI Audio, Volume Level, Volume Limit, Power On Volume, Mute Level, 12dB - +12dB
View all Marantz SR6008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Contents Connections 22Lch Level Adjust the left channel output level. -12dB - +12dB (Default : 0dB) Playback 22Rch Level Adjust the right channel output level. -12dB - +12dB (Default : 0dB) 22Channel Set the signal output from multi-zone. Stereo (Default) : S elect stereo output. Mono : S elect monaural output. 22HDMI Audio Selects the audio signal format for playing an HDMI source in ZONE2. Through (Default) : The HDMI audio signal is passed through the AV receiver to the device in ZONE2. PCM : The HDMI audio signal is converted to PCM format so you can listen to HDMI sound from the ZONE2 pre out or ZONE2 assigned speakers. Settings Tips Appendix 22Volume Level Set the volume output level. Variable (Default) : Volume adjustment is enabled by main unit and remote control unit. 1 - 98 (-79dB - 18dB) : The volume is adjusted to the set level. 22Volume Limit Make a setting for maximum volume. 60 (-20dB) / 70 (-10dB) / 80 (0dB) (Default : 70 (-10dB)) Off : Do not set a maximum volume. 22Power On Volume Define the volume setting that is active when the power is turned on. Last (Default) : Use the memorized setting from the last session. Mute : Always mute when power is turned on. 1 - 98 (-79dB - 18dB) : The volume is adjusted to the set level. 22Mute Level Set the amount of attenuation when muting is on. Full (Default) : The sound is muted entirely. -40dB : The sound is attenuated by 40 dB down. -20dB : The sound is attenuated by 20 dB down. % • This can be set when "Volume Level" is set to "Variable". Front panel Display Rear panel 184 Remote Index