Marantz SR6015 Owners Manual English - Page 175
IMAX Audio Settings, High Pass Filter, Low Pass Filter, Subwoofer Mode
View all Marantz SR6015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Contents Connections Playback o IMAX Audio Settings You can configure special IMAX audio settings to recreate the conditions of an IMAX theater. Auto (Default): Manual: Applies the optimized speaker settings to reproduce similar to the IMAX theater environment. Manually adjusts the "High Pass Filter", "Low Pass Filter" and "Subwoofer Mode". 0 You can set this when sound mode is "IMAX DTS" or "IMAX DTS:X". 0 "Speakers" - "Crossovers", "Bass" - "Subwoofer Mode" and "LPF for LFE" in the menu cannot be applied during IMAX playback. o High Pass Filter Set the high pass filter cutoff frequency for all speakers during IMAX playback. 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz / 200 Hz / 250 Hz (Default: 80 Hz) Settings Tips Appendix o Low Pass Filter Set the low pass filter cutoff frequency of the LFE signal during IMAX playback. 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz / 200 Hz / 250 Hz (Default: 120 Hz) 0 You can set this when "IMAX Audio Settings" is set to "Manual". o Subwoofer Mode Set the bass signal to be played by the subwoofer during IMAX playback. On: Off (Default): The low range signal of all speakers is added to the LFE signal output from the subwoofer. The LFE signal and the bass component of each speaker is played. Only the LFE signal is played. 0 You can set this when "IMAX Audio Settings" is set to "Manual". 0 You can set this when "IMAX Audio Settings" is set to "Manual". Front panel Display Rear panel 175 Remote Index