Marantz SR7015 Owners Manual English - Page 191
IMAX Audio Settings, High Pass Filter
View all Marantz SR7015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Contents Connections Playback o IMAX Sets the audio mode for IMAX playback. Auto (Default): On: Off: Automatically enables the IMAX mode when IMAX content is detected. Enables IMAX settings for IMAX streaming content when automatic detection is not possible. Disables the IMAX mode. Settings Tips Appendix o IMAX Audio Settings You can configure special IMAX audio settings to recreate the conditions of an IMAX theater. Auto (Default): Manual: Applies the optimized speaker settings to reproduce similar to the IMAX theater environment. Manually adjusts the "High Pass Filter", "Low Pass Filter" and "Subwoofer Mode". 0 In case of streaming the IMAX contents from online streaming service using TV Apps or player Apps (such as Blu-ray player's App), this unit may not detect the signal as IMAX contents automatically. In this case, you can enable IMAX mode by setting this parameter to "On" manually. 0 This setting can only be turned "On" when DTS 5.1 channel content recorded as IMAX DTS is input. 0 This setting cannot be set when headphones are used. 0 You can set this when sound mode is "IMAX DTS" or "IMAX DTS:X". 0 "Speakers" - "Crossovers", "Bass" - "Subwoofer Mode" and "LPF for LFE" in the menu cannot be applied during IMAX playback. o High Pass Filter Set the high pass filter cutoff frequency for all speakers during IMAX playback. 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz / 200 Hz / 250 Hz (Default: 80 Hz) 0 You can set this when "IMAX Audio Settings" is set to "Manual". Front panel Display Rear panel 191 Remote Index