Marantz SR7015 Owners Manual English - Page 297
Dolby Atmos, Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output.
View all Marantz SR7015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
Contents Connections Playback Settings Tips Appendix No sound is produced from subwoofer. 0 Check the subwoofer connections. 0 Turn on the subwoofer's power. 0 Set "Speaker Config." - "Subwoofer" in the menu to "1 spkr" or "2 spkrs". (v p. 242) 0 When "Speaker Config." - "Front" in the menu is set to "Large", depending on the input signal and the sound mode, no sound may be output from the subwoofer. (v p. 242) 0 When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the subwoofer. (v p. 250) 0 You can make the subwoofer always output sound by setting the "Subwoofer Mode" to "LFE+Main". (v p. 250) DTS sound is not output. 0 Check that the digital audio output setting on the connected device is set to "DTS". Dolby Atmos, Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output. 0 Make HDMI connections. (v p. 81) 0 Check the digital audio output setting on the connected device. On some devices, "PCM" is set by default. DTS Neural:X mode cannot be selected. 0 DTS Neural:X cannot be selected when using the headphones. Dolby Surround mode cannot be selected. 0 Dolby Surround cannot be selected when using the headphones. IMAX DTS:X cannot be selected. 0 IMAX DTS:X and IMAX DTS cannot be selected but DTS:X and DTS can be selected, when the headphones are used. Sound modes other than "Stereo" or "Direct" cannot be selected. 0 Only "Stereo" or "Direct" can be selected for the sound mode if Headphone:X signals are input. Front panel Display Rear panel 297 Remote Index