Maytag CWE5800ACS Installation Instructions - Page 2
Installation Requirements - wall oven
UPC - 719881149059
View all Maytag CWE5800ACS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed ■ Phillips screwdriver ■ Measuring tape ■ Hand or electric drill (for wall cabinet installations) ■ 1" (25 mm) drill bit (for wall cabinet installations) ■ Level Parts needed ■ UL listed or CSA approved conduit connector ■ UL listed wire connectors Parts supplied ■ 0.188 x 2.1" screws - single oven (4), double oven (6) Check local codes. Check existing electrical supply. See "Electrical Requirements." It is recommended that all electrical connections be made by a licensed, qualified electrical installer. Location Requirements IMPORTANT: Observe all governing codes and ordinances. ■ Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance with oven. ■ Recessed installation area must provide complete enclosure around the recessed portion of the oven. ■ Grounded electrical supply is required. See "Electrical Requirements" section. ■ Electrical supply junction box should be located in the upper right corner, 4" (10.2 cm) below the upper cut out surface of the cabinet. ■ Oven support surface must be solid, level and flush with bottom of cabinet cutout. Floor must be able to support a single oven weight of 154 lbs (70 kg) or a double oven weight of 287 lbs (130 kg). Product Dimensions - Single Oven A E B D C A. 22¹⁄₄" (56.5 cm) max. recessed width B. 29⁵⁄₈" (75.3 cm) max. overall height C. 23⁷⁄₈" (60.6 cm) overall width D. 22⁵⁄₈" (57.5 cm) max. recessed depth E. 27⁷⁄₈" (70.8 cm) recessed height Cabinet Dimensions - Single Oven Single Oven Installed in Cabinet A B F D E C A. 24" (61 cm) min. cabinet width B. 1¹⁄₂" (3.8 cm) top of cutout to bottom of upper cabinet door C. 33¹⁄₄" (84.5 cm) min. bottom of cutout to floor D. 22³⁄₈" (56.8 cm) cutout width E. 1¹⁄₂" (3.8 cm) min. bottom of cutout to top of cabinet door F. 28 72.9 cm) cutout height 2