Maytag M0RXEMMWM User Instructions - Page 13
Accessories
UPC - 883049191713
View all Maytag M0RXEMMWM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Temperature is too warm • New installation? Allow 24 hours following installation for the refrigerator to cool completely. • Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed. • Large load of food added? Allow several hours for refrigerator to return to normal temperature. • Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See "Using the Control(s)." There is interior moisture buildup NOTE: Some moisture buildup is normal. • Humid room? Contributes to moisture buildup. • Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed. The ice cubes are hollow or small NOTE: This is an indication of low water pressure. • Water shutoff valve not fully open? Turn the water shutoff valve fully open. • Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line. • Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See "Water Supply Requirements." • Questions remain regarding water pressure? Call a licensed, qualified plumber. Off-taste, odor or gray color in the ice • New plumbing connections? New plumbing connections can cause discolored or off-flavored ice. • Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice. • Odor transfer from food? Use airtight, moisture proof packaging to store food. • Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals. The ice maker is not producing ice or not enough ice • Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open. • Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line. • Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position. • New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production. • Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice. • Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil. • Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See "Water Supply Requirements." ACCESSORIES To order stainless steel cleaner, call 1-877-232-6771 and ask for the part number listed below or contact your authorized MAYTAG ® appliance dealer. In Canada, call 1-800-807-6777. Stainless Steel Cleaner and Polish: Order Part #20000008 13