Maytag MDB4651AWW Use and Care Manual - Page 5

Upper Rack

Glasses, cups, stemware, light-weight plastics, plates,

bowls, pans, long-handled utensils etc. can be loaded

in this rack.

Do not load glasses over the tines.

The Stack-Rack

TM

(select models) on the

right side of the upper

rack folds up or down

for loading flexibility.

Fold it down to hold

long-handled knives,

spatulas and spoons or short items like cups or juice

glasses. Fold it up for taller items like glasses, bowls,

plates, etc.

The edge of the

Stack-Rack

TM

(select

models) is designed

to hold stemware in

place. Taller stemware

will fit better on the

right side as the

upper rack is deeper

on this side.

Lower Rack

A variety of items such as dinner plates, mixing bowls,

pots and pans and baking dishes can be loaded in this

rack.

Wider items can be placed along the left side and

back of this rack.

Utensil Basket

Removable Standard Utensil Basket

(style may vary)

For best cleaning results, prevent

items from nesting together by

placing some items in the basket

with handles up and some with

handles down. On slotted covers,

load knives handles up and

spoons and forks handles down.

Be sure that thin, finely pointed items do not extend

through the basket. This could block the lower wash

arm.

Auxiliary Basket

(select models)

Use this supplemental basket in

the upper or lower rack for

loading miscellaneous items and

utensils. This is also a safe place

to load sharp knives and pointed

items.

Removing the Upper Rack

The rack can be removed when tall or oversized items

need to be loaded into the lower rack.

Unload the

rack before removing it from the dishwasher.

To remove rack with tab-lock rack stops:

1. Roll the rack

1

±

3

to

1

±

2

of the way out.

2. Locate the rack stops at the end of each track.

Squeeze the tab in the middle of the rack stop and

pull the rack stop straight out. Take care to support

the rack while removing the rack stops.

3. Roll the rack all the

way out of the track

and remove from

the dishwasher.

To replace:

1. Replace the

dishwasher rack by

guiding the wheels

into the tracks.

2. Push each rack stop squarely into the end of the

track until the catch pops into the small hole on the

side of the track.

Loading

Important:

The dishwasher will not

operate correctly if the

wash arm is not aligned

with one of the water

inlet holes on back wall

of the dishwasher.

4

Tab Lock

Rack Stop

Tab Lock

Style may vary by model

Maytag MDB4651AWW Use and Care Manual - Page 5

Loading - dishwasher model #

Page 5 highlights