Maytag MDB5601AWW User Manual - Page 10

Options - starts and stops

Page 10 highlights

Cycles, Options and Lights Options In addition to choosing a cycle from page 7, choose as many available options as are needed for your dishload. OPTION DESCRIPTION USE WITH CYCLES Hi Temp Wash (select models) Hi Temp Wash provides additional heat during the wash portion of the cycle, which ensures proper water temperature for better cleaning and drying results. It also adds an additional rinse to the cycle which improves results in hard water situations. All cycles (except Rinse Only [select models]) ToughScrub™/ ToughScrub™ Plus (select models) Selected when washing loads with hard-to-remove food soils. Depending on which cycle is being used, this option adds heat and/or wash time to the wash cycle. Heavy Wash Normal Wash Light Wash Auto Clean (select models) Sanitize (select models) Sanitizes dishware. When cycle monitor recognizes that the proper conditions have been met, Sanitized light will activate at the end of the cycle. Sanitization may not be achieved if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120° F (49° C). Heavy Wash* Normal Wash* Light Wash* Auto Clean* (select models) 160° Wash (select models) Raises temperature in the final rinse to 160° F. This option can be used with any cycle except Insta-Wash (select models) and Rinse Only. Heavy Wash Normal Wash Auto Clean* (select models) Heated Dry For enhanced drying results select this option. When Heated Dry is not selected, towel drying of some items such as plastic and items with non-stick surfaces may be necessary and more moisture may be noticed adhering to the dishwasher interior. In models with plastic interiors, it is normal to notice vapor escaping from the door vent as the heat dries your dishes. Vapor will escape even if Heated Dry is not selected. All cycles (except Rinse Only) Start/Cancel Starts and stops dishwasher. See page 3 under Operating Tips: Operating the Dishwasher, for explanation. All Cycles Delay Used to automatically start the cycle at a later time. See page 10 for instructions. All Cycles Control Lock Option Locks control touchpad to prevent unwanted use. See page 10 (select models) for instructions. All Cycles * Only these cycles have been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization. CAUTION CAUTION - In models with plastic interiors, it is normal to notice vapor escaping from the door vent in the upper left corner of the door as the heat dries your dishes. The vapor is hot and may cause minor burns. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

9
Heated Dry
* Only these cycles have been designated to meet NSF requirements (NSF/ANSI 184 Residential Dishwasher) for sanitization.
Start/Cancel
Delay
Control Lock Option
(select models)
Starts and stops dishwasher. See page 3 under
Operating Tips:
All Cycles
Operating the Dishwasher
, for explanation.
Used to automatically start the cycle at a later time. See page 10
All Cycles
for instructions.
Locks control touchpad to prevent unwanted use. See page 10
All Cycles
for instructions.
Options
OPTION
DESCRIPTION
USE WITH CYCLES
ToughScrub™/
ToughScrub™ Plus
(select models)
Sanitize
(select models)
Hi Temp Wash
(select models)
160° Wash
(select models)
Hi Temp Wash provides additional heat during the wash portion
All cycles
of the cycle, which ensures proper water temperature for better
(except Rinse Only
cleaning and drying results. It also adds an additional rinse to
[select models])
the cycle which improves results in hard water situations.
Selected when washing loads with hard-to-remove food soils.
Heavy Wash
Depending on which cycle is being used, this option adds
Normal Wash
heat and/or wash time to the wash cycle.
Light Wash
Auto Clean
(select models)
Sanitizes dishware. When cycle monitor recognizes that the
Heavy Wash*
proper conditions have been met, Sanitized light will activate
Normal Wash*
at the end of the cycle. Sanitization may not be achieved if
Light Wash*
there is an interruption of the cycle, power failure or if the
Auto Clean*
(select models)
incoming water temperature is below 120° F (49° C).
Raises temperature in the final rinse to 160° F. This option can
be used with any cycle except Insta-Wash (select models)
and Rinse Only.
For enhanced drying results select this option. When
Heated
Dry
is
not
selected, towel drying of some items such as plastic
and items with non-stick surfaces may be necessary and more
All cycles
moisture may be noticed adhering to the dishwasher interior.
(except Rinse Only)
In models with plastic interiors, it is normal to notice vapor
escaping from the door vent as the heat dries your dishes.
Vapor will escape even if
Heated Dry
is
not
selected.
In addition to choosing a cycle from page 7, choose as many available options
as are needed
for your dishload.
Heavy Wash
Normal Wash
Auto Clean*
(select models)
CAUTION –
In models with plastic interiors, it is normal to notice vapor escaping from the door vent in the upper left corner
of the door as the heat dries your dishes.
The vapor is hot and may cause minor burns.
CAUTION
Cycles, Options and Lights