Maytag MDB6709AWQ Installation Instructions - Page 12
Power Cord--Connect, Wiring, configuratio
UPC - 883049154343
View all Maytag MDB6709AWQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3__ Power Cord--Connect re m ai n in g wi re s : NOTE: Do not pre-twist stranded wire. Twist on wire connector. Gently tug on wires to be sure both are secured. Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors (not included). Wiring configuratio Power SUPp!y wire: ground white _ black_ Wire _ Termina I box Wire: white I biack ground Connector If needed, see website for animated representation Visit www.whirlpool.com under FAQ tab. of this step. Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use %" nut driver and previously removed screw to secure cover. NOTE: Do not plug into outlet until instructed. Tighten strain relief screws to secure cord. Measure height of cabinet opening from underside of countertop to floor where dishwasher will be installed (you will need to measure the lowest point on the underside of the countertop and the highest point on the floor). Refer to "Dishwasher Height Adjustment Chart" for wheel position and the number of turns needed. 12