Maytag MDB7601AWB Use and Care Guide - Page 5

Loading 10 Place Setting Load Upper Rack (Models with folding and convertible bowl tines in the lower rack) Upper Rack (Models without folding and convertible bowl tines in the lower rack) 4 saucersare loadedon the rackunderthe Stack-RackTM Shelf [select models) 3 saucersare loadedon the rackunderthe Stack-RackTM Shelf [select models) Lower Rack CModels with folding and convertible bowl tines) Lower Rack (Models without folding and convertible bowl tines) Upper Rack Glasses, cups, stemware, light-weight plastics, plates, bowls, pans, long-handled utensils etc. can be loaded in this rack. Do not load glasses over the tines. The Stack-Rack TM (select models) on the right side of the upper rack folds up or down for loading flexibility. Fold it down to hold longhandled knives, spatulas and spoons or short items like cups or juice glasses. Fold it up for taller items like glasses, bowls, plates, etc. The edge of the StackRack TM (select models) is designed to hold stemware in place. Taller stemware will fit better on the right side as the upper rack is deeper on this side. The Folding Tines (select models) located in the front right corner provide convenient loading space for large, bulky items like pots and pans or mixing bowls. To lower tines, carefully push the tines out of each holder toward the center of the rack and lay the tines down. The Cup Clips (select models) located in the center of the upper rack can be used to hold light-weight plastic items, cooking utensils, knives, etc. in place. Clip the item between the tine and the clip. The Vari-Lock TM Snugger (select models) on the left secures lightweight items in place. It can be adjusted by grasping the wavy wire and rotating it left to snug items against the outer rack or to the right to rest on top of light items. Do not load items on top of the wire. For best results with tall glasses, rest the bottom of the glass against the wavy wire of the Vari-Lock TM Snugger (select models). 4